保溫材料粘結強度拉拔儀是根據市場要求而量身研制的高精度粘結強度檢測儀，用于現場檢測外墻飾面磚、外墻外保溫材料、油漆、涂料的粘結強度，采用我公司A新開發的智能數字峰值保持表，小可測得0.001kN的力值，*各種粘結強度的檢測需要。
The insulation material bond strength puller is a high-precision bond strength tester developed according to market requirements. It is used to test the bond strength of exterior wall facing bricks, external wall insulation materials, paints and coatings. Company A's newly developed intelligent digital peak hold meter can measure a force value of 0.001kN, which fully meets the testing needs of various bonding strengths.
保溫材料粘結強度拉拔儀可連續均勻加荷，手動泵與專用千斤頂連為一體，結構緊湊，經久耐用，采用液晶顯示粘結力值，自動準確的記錄粘結力值并給予峰值保持，該產品采用高效鎳-氫充電電池，小巧輕便，總重約3千克，便于現場攜帶和使用。
The insulation material bond strength puller can be continuously and uniformly loaded. The manual pump is connected with a special jack as a whole. The structure is compact and durable. The liquid crystal display is used to display the adhesion value. This product uses a high-efficiency nickel-hydrogen rechargeable battery, which is small and light, and weighs about 3 kilograms. It is easy to carry and use on site.
保溫材料粘結強度拉拔儀適用標準：
JGJ110-97《建筑工程飾面磚粘接強度檢驗標準》
JGJ126-2000《外墻飾面磚工程施工及驗收規程》
JGJ144-2004《外墻外保溫工程技術規程》
JG158-2004《膠粉聚苯顆粒外墻外保溫系統》
JG149-2003《膨脹聚苯板薄抹灰外墻外保溫系統》
使用標準塊的規格為95mm×45mm×8mm和40mm×40mm×8mm，保溫材料標準試塊的規格為100mm×100mm×8mm， 在滿足合格要求時的小拉力為0.64kN，A大拉力為2.56kN，針對飾面磚粘結強度低和粘結力小的特點，專將大拉力設計6.00kN，以確保儀器的檢測精度。
Applicable standards for bond strength drawing instrument of insulation material:
JGJ110-97 "Test Standard for Bonding Strength of Facing Bricks in Construction Engineering"
JGJ126-2000 "Code for Construction and Acceptance of Exterior Wall Facing Bricks"
JGJ144-2004 "Technical Regulations for External Thermal Insulation Engineering"
JG158-2004 "Plastic powder polystyrene particles for external wall exterior insulation system"
JG149-2003 "Exfoliated polystyrene board thin plaster external wall exterior insulation system"
The standard block specifications are 95mm × 45mm × 8mm and 40mm × 40mm × 8mm. The standard test block specifications of insulation material are 100mm × 100mm × 8mm. The small tensile force is 0.64kN and the large tensile force is 2.56kN when it meets the requirements. In view of the low bonding strength and small bonding force of the facing bricks, the large tensile force is specifically designed to 6.00kN to ensure the detection accuracy of the instrument.
保溫材料粘結強度拉拔儀主要參數：
★檢測儀器大拉力值：6000N
★活塞行程 ：10mm
★重量 ：3Kg
★精度等級 ：1.0F.S
★分度值 ：0.001KN
★電源 ：9V6F
★工作電流 ： ≤10mA
★關斷電源 ：≤ 2m A
Main parameters of insulation material bond strength puller
★ High tensile force of testing instrument: 6000N
★ Piston stroke: 10mm
★ Weight: 3Kg
★ Accuracy grade: 1.0F.S
★ Graduation value: 0.001KN
★ Power supply: 9V6F
★ Working current: ≤10mA
★ Power off: ≤ 2m A
保溫材料粘結強度拉拔儀標準塊的規格為95mm*45mm 、40mm*40mm兩種。為滿足監理單位及工程質量監督檢驗 需求，現有100mm*100mm、和50mm*50mm的標準塊和保溫釘專用拉拔夾具選擇另配，
The specifications of the standard block of the insulation material bond strength puller are 95mm * 45mm and 40mm * 40mm. In order to meet the requirements of the supervision unit and engineering quality supervision and inspection the existing 100mm * 100mm and 50mm * 50mm standard blocks and special drawing fixtures for insulation nails are selected separately
