The design and manufacture of copper foil peel strength tester (Copper Foil Peel Strength Tester) 2.4.8 and 2.4.9 of IPC-TM-650 Test Methods Manual professional for copper-clad laminates and printed circuit board industries experimentaloutdoor measuring the peel strength of the flexible sheet
and the rigid panel of copper foil. PCB manufacturers to choose the best products. The structure is simple, easy to operate,
and can be placed on the work bench trial. The use of electronic control systems, the governor speed control motor rotation,
and then, after the shift mechanical reducer drive beams rise and fall of the Tscrew vice driven to complete the tensile or
compression tests. Force value by pushing or pulling force feedback, the test speed realtime display. The machine can be used
to test materials, finished products, tensile structures, compression, tearing, peeling strength, widely used in wire and cable,
plastic film, rubber products, textiles and leather, clothing footwear, automotive accessories, hardware accessories and more
the seed industry, quality management, physical property test of basic equipment.
一．銅箔抗剝離強度測試儀主要技術指標
1. *大試驗力：500 N 力表能力：可選擇0-1kg，0-5kg，0-10kg，0-15kg的力表。
2. 測試誤差：±0.5%
3. 剝離速度：50mm/分（2"/分）
4. 試驗行程：100mm
5. 速度精度：±1%
6. 力值分辨率：0.1N
7. 測試方式：電子控制，點動/自動切換
8. 電源：220V
9. 外形尺寸：310*410*500mm（W×D×H）
10.凈重：16kg
11.專業用于測量剛性覆銅板上的銅箔抗剝離強度，配備剛性試樣夾具小臺車
★.The main technical indicators
1.maximum test force: 500 N force table capacity: selectable 0-1kg ,0-5kg ,0-10kg ,0-15kg of force table.
2.Test error: ± 0.5%
3.Peel speed: 50 mm / min (2 "/ min)
4.Experimental stroke: 100 mm
5.Speed accuracy: ± 1%
6. Force value Resolution: 0.1N
7.Test ways: electronically controlled, jog / automatic switching
8.Power supply: 220V
9.Dimensions: 310 * 410 * 500 mm (W × D × H)
10.Net weight: 16kg
11.The professional foil peel strength measurement rigid CCL fixture with rigid sample small trolley
二．銅箔抗剝離強度測試儀主要功能與特點
1.力值數字液晶顯示，可辨別拉力或壓力，液晶界面清楚易讀 ；
2.負荷瞬間值、負荷峰值保持、負荷峰值延時保持三種顯示模式；
3.三種計量單位：N-Kgf-Lbf可選并能自動互換；
4.負荷上下限值設定，可執行GO、NG的判定；
5.液晶顯示帶背光照明，可在光線不足的環境中使用；
6.負荷超載有蜂鳴警報、指示燈變紅、屏幕顯示三種方式警示；
7.單次測定，即可讀取拉、壓兩個方向的峰值，并可自動和手動清零；
8.帶行程限位及過載停機功能。
9.采用USB數據連接線，可與電腦聯接使用，使用軟件進行統計分析及拉力圖表即時顯示。
★.Main functions and features
1.The force value digital LCD discernible tension or pressure, liquid crystal interface is clear and easy to read;
2.Load instantaneous value, the load peak hold, the load peak delay maintain the three display modes;
3.Three units of measurement: N-Kgf-Lbf optional and can automatically interchangeable;
4.The load of the upper and lower limits set executable GO, NG judgment;
5.LCD with backlight, can be used in low-light environments;
6.Overload buzzer alarm indicator light turns red, the screen shows three ways alerts;
7.Single determination, you can read pull peak pressure in both directions, and can automatically and manually cleared;
8.With stroke limiter and overload shutdown feature.
9.USB data cable can be connected with computer use, the use of software for statistical analysis and Rally chart real-time display.
