EE610差壓變送器
微壓差變送器
EE610是專為潔凈室、醫院、實驗室、隔離室以及制藥行業而研發的一款高精度微壓差變送器；
既適用于測量空氣也適用于非易燃和非腐蝕性氣體的測量。
測量性能
EE610測量精度可達±0.5 Pa，有多種量程范圍可選，分別是± 25 /± 50 / ± 100 Pa和0…100 Pa，用戶可通過撥碼開關來選擇需要的測量范圍。
壓敏電阻式傳感元件，可使產品保持*的長期穩定性能。
輸出信號
測量值以模擬信號的方式輸出，在彈簧端子上可同時提供電流和電壓輸出信號。顯示屏可顯示Pa、mbar、inch、water column或mm H2O等單位。
外殼結構
EE610的外殼防護等級為IP65/NEMA 4，其新穎的外殼結構顯著地降低了安裝成本。外部安裝孔使變送器不用打開封蓋即可實現快速安裝，從而保護了電子設備免受施工現場的污染。
組態配置
用戶可通過撥碼開關和電路板上的按鈕對EE610進行組態和配置，如：雙向或單向壓力量程、輸出信號、響應時間、顯示單元以及背光等。
技術資料 EE610
± 25 / ± 50 / ± 100 Pa
0...100 Pa
測量范圍
±0.5 Pa = 0.5 % FS*
精度- *滿量程
± 7000 Pa
負載限制
0-5 V或0-10 V和
0-20 mA或4-20 mA
模擬輸出 - 可通過DIP撥碼開關選擇
The EE610 is dedicated for the highly accurate measurement of low differential pressure in medical, pharmaceutical and clean room applications. It can be employed in air or in non-flammable and non-aggressive gases.
Measuring Performance
The EE610 offers selectable measuring ranges of ±25, ±50, ±100 and 0...100 Pa. The long-term stable, piezo-resistive non-flow-through pressure sensing element excludes the risk of cross-contamination.
Analogue Output and Display
The measured data is available as analogue current and voltage output. The graphic display shows the reading in Pa, mbar, inch water column or mm H2O.
Functional and Robust
The IP65 / NEMA 4 enclosure facilitates easy mounting and minimizes installation costs. External mounting holes allow installation with closed cover.
Configurable and Adjustable
The setup and adjustment of the EE610 can be performed with DIP-switches and push buttons on the electronics board: choice of pressure range, output signal, time constant, display units and backlight.
Key Features
- Multi-range device
- High accuracy
- Fully configurable
- Large graphic display
- Installation-friendly enclosure
